LTC2983TC
Represents calibration parameters for SensorModel.LTC2983_TC temperature sensor.
Constructors
Types
Curve types for temperature calibration. This is used to determine the type of temperature curve used for the cold junction compensation.
Excitation current in µA. This is the current used to excite the PT sensor for the cold junction compensation.
Open circuit current in µA. This is the current that flows through the thermocouple when it is open-circuited. It is used to detect an open circuit condition in the thermocouple.
PT sensor types. This is used to determine the type of PT sensor used for the cold junction compensation.
Thermocouple types. The thermocouple type is used to determine the temperature range and sensitivity of the thermocouple.
Properties
The type of temperature curve used for calibration. This is required only when the cold junction is configured in the factory configuration
The excitation current in µA. This is required only when the cold junction is configured in the factory configuration.
The extra delay multiplier in x100µs. Range 0 : 255 If excessive RC time constants are present in external sensor circuits (large bypass capacitors used for thermistors or RTDs), it is possible to increase the settling time between current source excitation and MUX switching.
The open circuit current in µA.
The type of PT sensor used. This is required only when the cold junction is configured in the factory configuration.
The type of thermocouple used.